All posts
Self-Publishing

Book Formatting: How to Format a Book for KDP

To format a book for KDP, you prepare two files. The eBook is a reflowable file from Word, EPUB or Kindle Create, with no page numbers or headers. The paperback is laid out at its trim size, with KDP’s margins for its page count and embedded fonts, and is best uploaded as a PDF.

SelfPub Go TeamUpdated 11 min read

In short

  • A Kindle eBook is reflowable by default: leave out page numbers, headers and footers, and give it a working table of contents.
  • For print, pick the trim size first. The page count it produces sets the inside margin, from 0.375″ up to 150 pages to 0.875″ at 701–828.
  • Top, bottom and outside margins must be at least 0.25″ without bleed and 0.375″ with bleed.
  • Embed every font, keep text at 7 points or larger, and upload a PDF, which is required when anything bleeds to the edge.
  • Check the paperback in KDP’s Print Previewer and the eBook in its Online Previewer or Kindle Previewer before you publish.
On this page

eBook and print: two layouts, two files

A Kindle eBook and a paperback hold the same words but are built differently. KDP’s eBook manuscript formatting guide puts it plainly: eBooks are reflowable and can be viewed with different font sizes, so page numbers and page count don’t apply. A paperback has fixed pages with margins, page numbers and headers, and KDP says a manuscript already published as a paperback needs reformatting for the eBook. Plan on two files:

ItemeBookPaperback
LayoutReflowable: the text resizes and reflowsFixed pages at the trim size
File to uploadDOC/DOCX, KPF or EPUBPDF, recommended; required with bleed
Page numbers, headersNoneNumbers in order; author left, title right
MarginsNone imposed on body textKDP minimums by page count
FontsDefault size; readers adjust itEmbedded, 7 points or larger
Table of contentsLinked entries, no page numbersPage numbers, added last
Check withOnline Previewer, Kindle PreviewerPrint Previewer, printed proof

Reflowable or fixed layout

KDP’s page on creating reflowable books says eBooks are reflowable by default: the text reflows when a reader changes the text settings. Its comparison of formats matches each format to a kind of book:

  • Reflowable. Text-heavy titles, with adjustable font settings, on all Kindle devices and apps. Novels, memoirs and other text-led books belong here.
  • Fixed layout. Image-heavy books with little text, such as children’s picture books and coffee table books, and comics, which get panel views.
  • Print Replica. Only when the content absolutely needs the exact print layout. It doesn’t support text resizing or screen readers and doesn’t work on Kindle e-readers.

Each Kindle book can use only one format, and KDP’s overview of ways to publish on Kindle advises converting to reflowable when possible, so this guide covers reflowable eBooks. For fixed layout, see our guide to self-publishing a comic book.

eBook file types KDP accepts

KDP’s list of supported eBook formats includes these three among its suggested and most commonly used formats:

  • Word (DOC or DOCX). Most Word files convert well; files with complex formatting may not.
  • KPF. The Kindle Package Format, the file Kindle Create exports.
  • EPUB. Accepted when it meets the Kindle Publishing Guidelines, whatever tool made it.

KDP also takes HTML, RTF, plain text and PDF, but PDF is a weak choice for a novel: it can carry formatting and images that don’t convert well, KDP’s tools and resources page doesn’t recommend it for text-heavy books, and PDF eBooks are supported in only nine languages. MOBI is no longer accepted for fixed-layout eBooks, since March 2025, and isn’t recommended for reflowable ones.

How to format an eBook in Word or Kindle Create

For a text-heavy book there are two routes: format the Word file yourself, or bring the finished manuscript into Kindle Create.

In Word

KDP’s eBook guide works through Word’s styles instead of formatting each paragraph by hand:

  • Modify the Normal style once: a first-line indent of 0.2″ (5 mm), 0 pt before and after, single line spacing. Never indent with the Tab key; KDP notes that tab spacing doesn’t convert to Kindle.
  • Apply Heading 1 to every chapter title.
  • End each chapter with a page break (Insert, then Page Break), as KDP’s text guidelines ask. Use a hard return only to start a paragraph or to add space between paragraphs, never at the end of every line.
  • Build the table of contents from those headings: References, then Table of Contents, then Custom Table of Contents, with Show Page Numbers cleared, as in KDP’s table of contents steps. Amazon requires a working one in every Kindle eBook with chapters or sections.
  • Save as DOC or DOCX and upload that file.

In Kindle Create

Kindle Create, KDP’s own tool for Windows and Mac, converts a finished DOC or DOCX file into a reflowable eBook (a PDF becomes a Print Replica or comic eBook instead), finds likely chapter titles for you to accept and turns every page break in the Word file into a new section. It styles the book with one of four themes, keeps the contents page up to date and exports KPF, which KDP calls the preferred format for Kindle eBooks and print books.

The same project can make the paperback: per KDP’s Kindle Create guide for print books, it resizes the content and margins for your trim size and adds page numbers to the print contents. Tables, lists and footnotes can’t be edited in it, and KDP’s paperback formatting page rules it out for paperbacks with tables, footnotes or images that bleed. KDP recommends it for text-heavy books with simple layouts.

What to leave out of a Kindle eBook

Several print habits don’t belong in an eBook file. KDP’s Guide to Kindle Content Quality and its eBook formatting guide name them:

  • Page numbers. Page numbers typed into the book file must be removed; KDP lists them as a critical issue. Its navigation guidelines keep them out of the contents page too.
  • Headers and footers. eBooks don’t have them, so there is nothing to add.
  • The cover image. Leave it out of the manuscript. When you publish, KDP adds the cover you provide during title setup.
  • Forced fonts. Body text must use the default font size and line height; a forced size or color, or body text all in bold or italics, is a listed quality issue.
  • Text boxes and shapes. Insert diagrams as images instead.
  • Tracked changes. Turn Track Changes off before you save.
  • Bonus content at the front. Previews of other books and extra stories go at the end; frontloading them is a critical issue.

Your font choices don’t change how Kindle+ (formerly Kindle Unlimited) counts pages, either: KDP’s KENP page says KENP is calculated using standard formatting settings, such as font, line height and line spacing. Our guide to KENP explains how those pages are paid.

For print, everything follows from the size of the page. KDP’s page on trim size, bleed and margins says to set your trim size before your margins, and names 6 × 9 inches as the most common US paperback size. The trim size decides how many pages the text fills, and KDP sets the inside margin by page count.

Take an 80,000-word novel. Our word count to pages calculator estimates about 259 pages at 6 × 9 and 302at 5 × 8. Those land in different rows of KDP’s margin table below: an inside margin of 0.5″ (12.7 mm) for the first and 0.625″ (15.9 mm) for the second. The page count also sets the printing cost, $4.11 against $4.62 in black ink on Amazon.com; check your own book in the KDP printing cost calculator.

Our guide to book sizes lists every trim size KDP prints and how to choose one. Settle the ink and paper at the same time, since KDP’s print options lock them once the book is published. In Word, the trim size goes into Page Size as the width and height, per KDP’s Word formatting guide for paperbacks.

KDP margins by page count

Margins keep the text from being cut off when the pages are trimmed. KDP’s paperback submission guidelines set a minimum inside margin, the gutter on the spine side, that grows with the page count, and a minimum for the top, bottom and outside edges that depends on bleed:

PagesInside (gutter)Outside, no bleedOutside, bleed
24–1500.375″ (9.6 mm)at least 0.25″ (6.4 mm)at least 0.375″ (9.6 mm)
151–3000.5″ (12.7 mm)at least 0.25″ (6.4 mm)at least 0.375″ (9.6 mm)
301–5000.625″ (15.9 mm)at least 0.25″ (6.4 mm)at least 0.375″ (9.6 mm)
501–7000.75″ (19.1 mm)at least 0.25″ (6.4 mm)at least 0.375″ (9.6 mm)
701–8280.875″ (22.3 mm)at least 0.25″ (6.4 mm)at least 0.375″ (9.6 mm)

“Outside” means the top, bottom and outside edges, which don’t have to match. Treat the table as a floor: a little more white space makes a page easier to read. In Word, KDP’s guide selects Mirror margins, enters the Top, Bottom, Inside and Outside values and leaves Word’s separate Gutter field empty. KDP’s paperback file setup calculator also gives margin, bleed and spine measurements.

Bleed: only when something reaches the edge

Bleed matters only if an image, illustration or background is meant to run to the edge of a page. When a book is printed, KDP trims every page to size by cutting 0.125″ (3.2 mm) from the top, bottom and outside edges, so anything that should reach the edge has to extend that far past the trim line. A text-only novel doesn’t need bleed. The rules, from KDP’s bleed and margins page:

  • Every KDP cover has bleed; for the interior, it’s your choice.
  • If even one interior page needs bleed, set up the whole file with bleed.
  • The page grows by 0.125″ in width and 0.25″ in height. KDP’s example: a 6 × 9 book is set up at 6.125 × 9.25 inches. An 8.5 × 11 workbook becomes 8.625 × 11.25.
  • The top, bottom and outside margins grow to at least 0.375″.
  • Bleed works only in a print-ready PDF.

KDP’s getting-started guide calls failure to account for bleed one of the most common reasons manuscripts don’t pass quality review, so decide it before you lay out a single page.

Fonts, images and the PDF

KDP’s rules for saving the manuscript file accept an interior without bleed as PDF, DOC, DOCX, RTF, HTML or TXT and convert it to PDF before printing, but recommend converting to PDF yourself for the best results. With bleed, PDF is required. Before you export:

  • Embed every font. KDP wants all fonts fully embedded in interior and cover files. In Word, KDP’s Word-to-PDF steps check “Embed fonts in the file” under File, Options, Save, with the two boxes below it unchecked. In the PDF, File, Properties, Fonts should list each font as Embedded or Embedded Subset.
  • Use fonts you’re licensed to use. KDP’s paperback fonts page makes the licenses your responsibility, and warns that some fonts from free font sites won’t embed because of technical or legal restrictions.
  • Keep text at 7 points or larger. That is KDP’s minimum. Its Word guide suggests body text between 9 and 12 points: 9 for a font that sets large, such as Arial, and 12 for one that sets small, such as Times New Roman.
  • Use images of at least 300 DPI. Embed them, and flatten transparent objects and layers.
  • Upload clean single pages. No spreads, crop marks, comments, bookmarks or leftover placeholder text; nothing locked or encrypted; no more than 650 MB. KDP prefers PDF/X-1a.

KDP also has its own font, Amazon Endure, which it says is designed to reduce the page count and with it the printing cost. It isn’t available in Japanese, Kanji or Cyrillic characters.

Front matter, page numbers and headers

KDP’s guide to front matter, body matter and back matter describes how a print book is usually laid out, and notes that many of the elements are optional. The usual order before chapter one is half title, title page, copyright page, reviews and praise, dedication, table of contents, preface, acknowledgments, prologue and introduction. Then:

  • The half title, title page, dedication, table of contents and chapter one start on right-facing pages. The copyright page is the first left-facing page after the title page.
  • The half title, title, copyright and contents pages carry no page numbers or headers, and neither does a dedication that fits on one page.
  • Page numbers are Arabic numerals, in order, with even numbers on left pages. KDP’s submission guidelines also allow Roman numerals at the beginning before standard numbering starts.
  • Left-page headers show the author name and right-page headers the book title. Chapter title pages have no header, and a chapter’s first paragraph has no first-line indent.
  • KDP’s list of formatting issues allows no more than 4 blank pages in a row at the beginning or middle of the file and 10 at the end.

In Word, KDP’s paperback guide separates the front matter from the body with a Next Page section break, repeats it at the end of each chapter, numbers the front matter in small Roman numerals and starts the body at 1. Its Different First Page option removes the header from chapter openings and the page number from pages such as the title page.

Our guide to the parts of a book covers each page in detail. The copyright page generator drafts the copyright page, and our guide to the dedication page has examples for the page that follows it.

KDP’s Word templates

KDP’s manuscript templates do much of this setup for you. They are Word files for each trim size, downloaded as a ZIP: blank ones with the page size and margins already set, or ones with sample content, which add formatted front matter, chapters with placeholder text and an author bio page at the end. Before you upload one:

  • Remove every scrap of sample text: leftover template text can cause an upload error or a rejection on review.
  • Make the title and author name in the headers match exactly what you enter at title setup.
  • Add an ISBN to the copyright page only if you want to. If you do, it must match your book’s ISBN, written 978-X-XXXX-XXXX-X.
  • Fill in the contents page numbers last, once the text stops moving.
  • Watch pasted text: formatting copied from another document can come with it and need fixing.
  • Save as PDF with the fonts embedded.

KDP’s getting-started guide adds that a paperback and a hardcover of the same book can use the same interior manuscript.

Check it in the previewer before you publish

Both formats have a previewer, and both deserve a slow page-by-page read before you publish.

  • Paperback: Print Previewer. On your Bookshelf, choose “…” next to the book, Edit paperback content, then Launch Previewer under Book Preview. Per KDP’s preview page, it shows what the paperback will look like and checks for errors you must fix before submitting; after you submit, KDP also checks the files by hand and emails you if something needs fixing.
  • eBook: Online Previewer. Find it under Kindle eBook Preview in Edit eBook content. Tablet and phone modes show color, Kindle E-Reader mode shows grayscale, and a quality check flags spelling and image issues.
  • eBook: Kindle Previewer. A free desktop app for Windows and Mac that opens EPUB, HTML, KPF, DOC and DOCX files and previews them by device, orientation and font.

A printed copy shows what a screen can’t, and KDP lets you order a proof before you publish; our guide to KDP author copies explains how. Last, make the details agree: the title, author name and ISBN in your files have to match what you entered at title setup.

See what each book earns after its ads.

Once the book is out, SelfPub Go puts its KDP royalties and Kindle+ page reads next to its Amazon Ads spend, book by book, in a desktop app for macOS and Windows.

Download SelfPub Go

Formatting rules, margins and file types come from the linked KDP Help pages as of the date at the top. If a linked page now says otherwise, trust the linked page.

Frequently asked questions

How do I format a book for KDP?

Make two files from the same text. For the Kindle eBook, use a reflowable Word, EPUB or Kindle Create file with styles for paragraphs and chapter titles, a page break after each chapter, a linked table of contents and no page numbers, headers or footers. For the paperback, choose the trim size, use KDP's margins for your page count, embed every font, upload a PDF and check it in KDP's Print Previewer.

What margins does KDP require?

The inside (gutter) margin depends on the page count: 0.375 inch for 24–150 pages, 0.5 inch for 151–300, 0.625 inch for 301–500, 0.75 inch for 501–700 and 0.875 inch for 701–828. The top, bottom and outside margins must be at least 0.25 inch without bleed and 0.375 inch with bleed.

What file format should I upload to KDP?

For a paperback, a PDF: KDP accepts PDF, DOC, DOCX, RTF, HTML or TXT for an interior without bleed but recommends converting to PDF first, and requires PDF when anything bleeds to the page edge. For an eBook, KDP suggests Word (DOC or DOCX), KPF from Kindle Create or EPUB; it also takes HTML, RTF, TXT and PDF, but says PDF is not recommended for text-heavy books.

Do I need bleed for my book?

Only if an image, illustration or background reaches the edge of an interior page. Then the whole file needs bleed: the page is 0.125 inch wider and 0.25 inch taller than the trim size, the top, bottom and outside margins become at least 0.375 inch, and the file must be a PDF. Every KDP cover has bleed regardless.

Should an eBook have page numbers?

No. KDP says page numbers and page count don't apply to reflowable eBooks, lists page numbers typed into the book file as a critical quality issue that must be removed, and asks for no page numbers in the table of contents. Headers and footers don't apply to eBooks either.

Can I use Kindle Create for a paperback?

Yes, for a text-heavy book with a simple layout, which is what KDP recommends it for. One Kindle Create project can produce the eBook and the paperback, resizing the content and margins for the trim size you choose. KDP doesn't support Kindle Create for paperbacks with tables, footnotes or images that bleed.

What font size should a book be?

In print, KDP's minimum is 7 points, and its Word guide suggests body text between 9 and 12 points: 9 for a font that sets large, such as Arial, and 12 for one that sets small, such as Times New Roman. In a reflowable eBook, leave body text at the default size, because readers set their own.

See what each book earns after its ads.

SelfPub Go puts your Amazon Ads spend next to your KDP royalties, book by book, and points out ads that spend without selling.

Create an account